ABSTRACT
β-Carotene is one of the most abundant natural pigments in foods; however, usage of β-carotene is limited because of its instability. Microencapsulation techniques are usually applied to protect microencapsulated β-carotene from oxidization. In this study, β-carotene was microencapsulated using different drying processes: spray-drying, spray freeze-drying, coating, and spray granulation. The properties of morphology, particle size, water content, thermal characteristic, and chemical stability have been explored and compared. Scanning electron microscopy measure¬ments showed that the coated powder had a dense surface surrounded by starch and suggested that the coating process gave a microencapsulated powder with the smallest bulk density and the best compressibility among the prepared powders. The chemical stabilities of microcapsules were evaluated during six months of storage at different temperatures. The coated powder had the highest mass fraction of β-carotene, which indicated that the coating pro¬cess was superior to the three other drying processes.
ABSTRACT
Objective To select the optimum process of granule spray for Tangwang Mingmu Granules, To improve the yield and finished product quality. Methods The effects of the relative density, the type of excipients, the ratio of the extract and the excipient, the inlet temperature-the material temperature, the spray rate and the atomization pressure were selected by single factor and orthogonal test respectively to determine the optimum preparation process. Validation for three batch sample, particle flow, hygroscopicity and other related content of the preparation were studied. Results The optimum spray granulation process of Tangwang Mingmu Granules: the relative density of extract (60 ℃ determination) was 1.15–1.20; the excipient was selected as dextrin; the ratio of dry extract and excipient was 58:42; inlet temperature - material temperature was 90-75 ℃; atomization pressure was 0.12 mPa;spray rate was 10 Hz.Conclusion The preparation technology of Tangwang Mingmu Granules optimized in this study is with high preparation rate, good fluidity and hygroscopicity, which can be used for the preparation of Tangwang Mingmu Granules.
ABSTRACT
This study was aimed to optimize Qinshuang particle best spray granulation process conditions. The or-thogonal test method was used with grain yield and baicalin transfer rate as the inspection indexes. The main in-fluence factors of Qinshuang particle spray granulation process were investigated. The results showed that the best technological parameters are atomization pressure of 1 800 Pa, inlet temperature at 90°C - 100°C, outlet temper-ature at 50 ° C - 60 ° C , and the extract relative density of 1 . 10 ( 60 ° C ) . It was concluded that the reasonable pro-cess conditions make particles with stable quality, which provide the experimental basis for industrial production.